| Content\Brand | KEESSON | OTHERS |
| Service Life | 25-30 years | 10-15 years |
| Welding | ABB automatic full welding | Manual welding/mechanical welding |
| Angle Piece | Angle piece drainage patent | Ordinary corner pieces |
| Roof | Micro-arch roof | Flat Roofs |
| 1.4mm THC Blind wave steel plate | 0.4-0.8mm THC flat roofs | |
| Fully welded | Spot welding | |
| Frame Material | 3.0 mm THC Q235B steel | 2.5 mm THC |
| Wall Panel | 75mm thick rock wool sandwich insulation board； Bulk density: 80kg/m³ |
Thickness: 40-50mm， Bulk Density: 50-60kg/m³ |
| Window | Hollow broken bridge thermal insulation aluminum alloy windows | Ordinary window |
| Paint | Hang paint on the inside, outside, top, and bottom of the frame in all directions | Manual paint, the bottom part of the frame in contact with the ground is not painted |
| Wires | Internal wires are embedded | Exposed wires are often used |
| Accessories | Provided by LESSO (fortune 500 enterprise in the world) | Ordinary supplier |
| Paint Film | 80-micron | 15 microns |
| Zincification | 270g/㎡ | 40g/㎡ |
| Product Specifications | Length*Width*Height | 6055*2990*2896（Inner:5845*2780*2530） | Floor | Decorative Surface | 1.8mm Thick PVC Non-slip Floor |
| Roof | Blind Slab Roof, Organized Internal Drainage Through 4 Columns | Substrate | 18mm Thick Cement Fiberboard, Density ≥1.3g/cm3 | ||
| Number of Layers | ≤ 3 layers | Wall | Thickness | Use 0.4mm. Al-zinc-plated color steel plate, the color is white-gray, PE coating | |
| Design Parameters | Structural Design Service Life | 20 Years | Keep Warm | Rock Wool, Capacity ≥80kg/m3 | |
| Ground Load | 2.0KN/M2 | Door | Specification |
|
|
| Roof Load | 1.5KN/M2 | Material |
|
||
| Wind Load | 0.6KN/M2 | Window | Specification | Width×height=1130*1100mm | |
| Seismic Fortification Intensity | 8 Degrees | Frame Material | FRP, 75 series, with Screen Window | ||
| Structure | Prism | Specification: L210*150mm,Galvanized cold rolled section steel, t=3.0mm, material Q235B | Glass | 5mm+9A+5mm Hollow Glass | |
| Roof Main Beam | Specification: 180mm, Galvanized Cold Rolled Section Steel, t=3.0mm, Material: Q235B Steel | Electricity | Voltage | 220～250V | |
| Ground Beam | Specification: 160mm,Galvanized Cold Rolled Section Steel,t=3.0mm,Material Q235B | Wire | Total Circuit BVVB-3*6.0, Air Conditioner BVVB-3*4.0, Socket BVVB-3*2.5, Lighting BVVB-3*1.5 | ||
| Roof Secondary Beam | Specification: 160mm,Galvanized Cold Rolled Section Steel,t=3.0mm,Material Q235B | Distribution Box | 5-7 Concealed PVC Distribution Boxes*1 (including 1 set of high breaking circuit breaker 10A/1P, high breaking circuit breaker 20A/2P, high breaking circuit breaker 25A/2P, and leakage protection circuit breaker 15A/2P) | ||
| Ground Secondary Beam | Specification: C120 Galvanized Cold Rolled Steel, t=2.0mm, Material Q235B | Illumination | LED light Bar (LED40W)*2 | ||
| Paint | Powder Spraying, Paint Surface ≥80μm, off-white | Socket | Industrial Socket (3P/32A)*1, Five-hole socket with USB interface (250V 10A)*4, Three-hole socket (250V/16A)*1, one Switch*1 | ||
| Roof | Roof Panel | 1.4mm Blind Wave Plate, Stamping and Forming, Integral Welding | Decoration | Top and Column packages | 0.5mm Thick Aluminum-zinc Color Steel Sheet Folding Parts, White Gray |
| Insulation Cotton | 100mm Thick Glass Wool Felt, with Aluminum Foil on One Side, Bulk Density ≥14kg/m3 | Skirting | 65mm High PVC, Color Wood Grain Brown | ||
| Ceiling Board | 0.4mm Thick Profiled, Aluminum-zinc-Plated Color Steel Plate, White-gray Color | ||||
| Note: The container is SGS tested and the materials are A-GRADE FIRE-RESISTANT. Also, necessary bolts and screws will be provided for assembly and construction. | |||||
Cutting >> Roller forming >> Stamping forming >> Assembly >> Automatic welding and full welding >> Powder spraying >> Baking paint >> Floor installation >> Ceiling installation >> Finished product inspection >> Pack and store
KEESSON Provides a one-stop service that can meet all customers' requirements. Check more shipping info Here
